Tymnet was an international data communications network headquartered in San Jose, California that utilized virtual call packet switched technology and used X.25, SNA/SDLC, ASCII and BSC interfaces to connect host computers (servers) at thousands of large companies, educational institutions, and government agencies. Users typically connected via dial-up connections or dedicated async connections. The business consisted of a large public network that supported dial-up users and a private network business that allowed government agencies and large companies (mostly banks and airlines) to build their own dedicated networks. The private networks were often connected via gateways to the public network to reach locations not on the private network. Tymnet was also connected to dozens of other public networks in the United States and internationally via X.25/X.75 gateways.
As the Internet grew and became almost universally accessible in the late 1990s, the need for services such as Tymnet migrated to the Internet style connections, but still had some value in the third world and for specific legacy roles. However the value of these links continued to decrease, and Tymnet was officially shut down in 2004.
Network
Tymnet offered local dial-up modem access in most cities in the United States and to a limited degree in Canada, which preferred its own DATAPAC service.
Users would dial into Tymnet and then interact with a simple command-line interface to establish a connection with a remote system. Once connected, data was passed to and from the user as if connected directly to a modem on the distant system. For various technical reasons, the connection was not entirely "invisible", and sometimes required the user to enter arcane commands to make 8-bit clean connections work properly for file transfer.
Tymnet was extensively used by large companies to provide dial-up services for their employees who were "on the road", as well as a gateway for users to connect to large online services such as CompuServe or The Source.
Organization and functionality
In its original implementation, the network supervisor contained most of the routing intelligence in the network. Unlike the TCP/IP protocol underlying the internet, Tymnet used a circuit switching layout which allowed the supervisors to be aware of every possible end-point. In its original incarnation, the users connected to nodes built using Varian minicomputers, then entered commands that were passed to the supervisor which ran on a XDS 940 host.
Circuits were character oriented and the network was oriented towards interactive character-by-character full-duplex communications circuits. The nodes handled character translation between various character sets, which were numerous at that point in time. This did have the side effect of making data transfers quite difficult, as bytes from the file would be invisibly "translated" without specific intervention on the part of the user.
Tymnet later developed their own custom hardware, the Tymnet Engine, which contained both nodes and a supervisor running on one of those nodes. As the network grew, the supervisor was in danger of being overloaded by the sheer number of nodes in the network, since the requirements for controlling the network took a great part of the supervisor's capacity.
Tymnet II was developed in response to this challenge. Tymnet II was developed to ameliorate the problems outlined above by off-loading some of the work-load from the supervisor and providing greater flexibility in the network by putting more intelligence into the node code. A Tymnet II node would set up its own "permuter tables", eliminating the need for the supervisor to keep copies of them, and had greater flexibility in handling its inter-node links. Data transfers were also possible via "auxiliary circuits".
As the Internet grew and became almost universally accessible in the late 1990s, the need for services such as Tymnet migrated to the Internet style connections, but still had some value in the third world and for specific legacy roles. However the value of these links continued to decrease, and Tymnet was officially shut down in 2004.
Network
Tymnet offered local dial-up modem access in most cities in the United States and to a limited degree in Canada, which preferred its own DATAPAC service.
Users would dial into Tymnet and then interact with a simple command-line interface to establish a connection with a remote system. Once connected, data was passed to and from the user as if connected directly to a modem on the distant system. For various technical reasons, the connection was not entirely "invisible", and sometimes required the user to enter arcane commands to make 8-bit clean connections work properly for file transfer.
Tymnet was extensively used by large companies to provide dial-up services for their employees who were "on the road", as well as a gateway for users to connect to large online services such as CompuServe or The Source.
Organization and functionality
In its original implementation, the network supervisor contained most of the routing intelligence in the network. Unlike the TCP/IP protocol underlying the internet, Tymnet used a circuit switching layout which allowed the supervisors to be aware of every possible end-point. In its original incarnation, the users connected to nodes built using Varian minicomputers, then entered commands that were passed to the supervisor which ran on a XDS 940 host.
Circuits were character oriented and the network was oriented towards interactive character-by-character full-duplex communications circuits. The nodes handled character translation between various character sets, which were numerous at that point in time. This did have the side effect of making data transfers quite difficult, as bytes from the file would be invisibly "translated" without specific intervention on the part of the user.
Tymnet later developed their own custom hardware, the Tymnet Engine, which contained both nodes and a supervisor running on one of those nodes. As the network grew, the supervisor was in danger of being overloaded by the sheer number of nodes in the network, since the requirements for controlling the network took a great part of the supervisor's capacity.
Tymnet II was developed in response to this challenge. Tymnet II was developed to ameliorate the problems outlined above by off-loading some of the work-load from the supervisor and providing greater flexibility in the network by putting more intelligence into the node code. A Tymnet II node would set up its own "permuter tables", eliminating the need for the supervisor to keep copies of them, and had greater flexibility in handling its inter-node links. Data transfers were also possible via "auxiliary circuits".
