Types of Packet Switching

Connectionless and connection-oriented packet switching

The service actually provided to the user by networks using packet switching nodes can be either be connectionless (based on datagram messages), or virtual circuit switching (also known as connection oriented). Some connectionless protocols are Ethernet, IP, and UDP; connection oriented packet-switching protocols include X.25, Frame relay, Asynchronous Transfer Mode (ATM), Multiprotocol Label Switching (MPLS), and TCP.

In connection oriented networks, each packet is labeled with a connection ID rather than an address. Address information is only transferred to each node during a connection set-up phase, when an entry is added to each switching table in the network nodes.

In connectionless networks, each packet is labeled with a destination address, and may also be labeled with the sequence number of the packet. This precludes the need for a dedicated path to help the packet find its way to its destination. Each packet is dispatched and may go via different routes. At the destination, the original message/data is reassembled in the correct order, based on the packet sequence number. Thus a virtual connection, also known as a virtual circuit or byte stream is provided to the end-user by a transport layer protocol, although intermediate network nodes only provides a connectionless network layer service.

Packet switching in networks

Packet switching is used to optimize the use of the channel capacity available in digital telecommunication networks such as computer networks, to minimize the transmission latency (i.e. the time it takes for data to pass across the network), and to increase robustness of communication.

The most well-known use of packet switching is the Internet and local area networks. The Internet uses the Internet protocol suite over a variety of Link Layer protocols. For example, Ethernet and frame relay are very common. Newer mobile phone technologies (e.g., GPRS, I-mode) also use packet switching.

X.25 is a notable use of packet switching in that, despite being based on packet switching methods, it provided virtual circuits to the user. These virtual circuits carry variable-length packets. In 1978, X.25 was used to provide the first international and commercial packet switching network, the International Packet Switched Service (IPSS). Asynchronous Transfer Mode (ATM) also is a virtual circuit technology, which uses fixed-length cell relay connection oriented packet switching.

Datagram packet switching is also called connectionless networking because no connections are established. Technologies such as Multiprotocol Label Switching (MPLS) and the Resource Reservation Protocol (RSVP) create virtual circuits on top of datagram networks. Virtual circuits are especially useful in building robust failover mechanisms and allocating bandwidth for delay-sensitive applications.

MPLS and its predecessors, as well as ATM, have been called "fast packet" technologies. MPLS, indeed, has been called "ATM without cells". Modern routers, however, do not require these technologies to be able to forward variable-length packets at multigigabit speeds across the network.

image