FTP over SSH (not SFTP)

FTP over SSH (not SFTP) refers to the practice of tunneling a normal FTP session over an SSH connection.

Because FTP uses multiple TCP connections (unusual for a TCP/IP protocol that is still in use), it is particularly difficult to tunnel over SSH. With many SSH clients, attempting to set up a tunnel for the control channel (the initial client-to-server connection on port 21) will protect only that channel; when data is transferred, the FTP software at either end will set up new TCP connections (data channels) which will bypass the SSH connection, and thus have no confidentiality, integrity protection, etc.

Otherwise, it is necessary for the SSH client software to have specific knowledge of the FTP protocol, and monitor and rewrite FTP control channel messages and autonomously open new forwardings for FTP data channels. Version 3 of SSH Communications Security's software suite, and the GPL licensed FONC are two software packages that support this mode.

FTP over SSH is sometimes referred to as secure FTP; this should not be confused with other methods of securing FTP, such as with SSL/TLS (FTPS). Other methods of transferring files using SSH that are not related to FTP include SFTP and SCP; in each of these, the entire conversation (credentials and data) is always protected by the SSH protocol.


Red Drive is a free file transfer extension that integrates with your Windows Explorer environment allowing you to drag, drop, open and edit files on remote servers without launching a separate file transfer client. Red Drive supports various file transfer protocols including FTP, FTPS (FTP over SSL), SFTP (FTP over SSH) and WebDAV.

Anonymous FTP

A host which provides an FTP service may additionally provide Anonymous FTP access as well. Under this arrangement, users do not strictly need an account on the host. Instead the user typically enters 'anonymous' or 'ftp' when prompted for username. Although users are commonly asked to send their email address as their password, little to no verification is actually performed on the supplied data.

As modern FTP clients typically hide the anonymous login process from the user, the ftp client will supply dummy data as the password (since the user's email address may not be known to the application).

For example, the following ftp user agents specify the listed passwords for anonymous logins:

* Mozilla Firefox (2.0) — mozilla@example.com

* KDE Konqueror (3.5) — anonymous@

* wget (1.10.2) — -wget@

* lftp (3.4.4) — lftp@

The Gopher protocol has been suggested as an alternative to anonymous FTP, as well as Trivial File Transfer Protocol and File Service Protocol.

Technorati Tags: TFTP,Anonymous FTP,FTP,File transfer,Protocol,FTP Service,Access,Modern FTP,Login Process,Mozilla,KDE,Wget,Lftp,Gopher Protocol

FTP and NAT devices

The representation of the IPs and ports in the PORT command and PASV reply poses another challenge for NAT devices in handling FTP. The NAT device must alter these values, so that they contain the IP of the NAT-ed client, and a port chosen by the NAT device for the data connection. The new IP and port will probably differ in length in their decimal representation from the original IP and port. This means that altering the values on the control connection by the NAT device must be done carefully, changing the TCP Sequence and Acknowledgment fields for all subsequent packets.

For example: A client with an IP of 192.168.0.1, starting an active mode transfer on port 1025, will send the string "PORT 192,168,0,1,4,1". A NAT device masquerading this client with an IP of 192.168.15.5, with a chosen port of 2000 for the data connection, will need to replace the above string with "PORT 192,168,15,5,7,208".

The new string is 23 characters long, compared to 20 characters in the original packet. The Acknowledgment field by the server to this packet will need to be decreased by 3 bytes by the NAT device for the client to correctly understand that the PORT command has arrived to the server. If the NAT device is not capable of correcting the Sequence and Acknowledgement fields, it will not be possible to use active mode FTP. Passive mode FTP will work in this case, because the information about the IP and port for the data connection is sent by the server, which doesn't need to be NATed. If NAT is performed on the server by the NAT device, then the exact opposite will happen. Active mode will work, but passive mode will fail.

It should be noted that many NAT devices perform this protocol inspection and modify the PORT command without being explicitly told to do so by the user. This can lead to several problems. First of all, there is no guarantee that the used protocol really is FTP, or it might use some extension not understood by the NAT device. One example would be an SSL secured FTP connection. Due to the encryption, the NAT device will be unable to modify the address. As result, active mode transfers will fail only if encryption is used, much to the confusion of the user.

The proper way to solve this is to tell the client which IP address and ports to use for active mode. Furthermore, the NAT device has to be configured to forward the selected range of ports to the client's machine.

Connection methods

FTP runs exclusively over TCP. FTP servers by default listen on port 21 for incoming connections from FTP clients. A connection to this port from the FTP Client forms the control stream on which commands are passed to the FTP server from the FTP client and on occasion from the FTP server to the FTP client. FTP uses out-of-band control, which means it uses a separate connection for control and data. Thus, for the actual file transfer to take place, a different connection is required which is called the data stream. Depending on the transfer mode, the process of setting up the data stream is different.

In active mode, the FTP client opens a dynamic port (49152–65535), sends the FTP server the dynamic port number on which it is listening over the control stream and waits for a connection from the FTP server. When the FTP server initiates the data connection to the FTP client it binds the source port to port 20 on the FTP server.

In order to use active mode, the client sends a PORT command, with the IP and port as argument. The format for the IP and port is "h1,h2,h3,h4,p1,p2". Each field is a decimal representation of 8 bits of the host IP, followed by the chosen data port. For example, a client with an IP of 192.168.0.1, listening on port 49154 for the data connection will send the command "PORT 192,168,0,1,192,2". The port fields should be interpreted as p1×256 + p2 = port, or, in this example, 192×256 + 2 = 49154.

In passive mode, the FTP server opens a dynamic port (49152–65535), sends the FTP client the server's IP address to connect to and the port on which it is listening (a 16 bit value broken into a high and low byte, like explained before) over the control stream and waits for a connection from the FTP client. In this case the FTP client binds the source port of the connection to a dynamic port between 49152 and 65535.

To use passive mode, the client sends the PASV command to which the server would reply with something similar to "227 Entering Passive Mode (127,0,0,1,192,52)". The syntax of the IP address and port are the same as for the argument to the PORT command.

In extended passive mode, the FTP server operates exactly the same as passive mode, however it only transmits the port number (not broken into high and low bytes) and the client is to assume that it connects to the same IP address that was originally connected to. Extended passive mode was added by RFC 2428 in September 1998.

While data is being transferred via the data stream, the control stream sits idle. This can cause problems with large data transfers through firewalls which time out sessions after lengthy periods of idleness. While the file may well be successfully transferred, the control session can be disconnected by the firewall, causing an error to be generated.

The FTP protocol supports resuming of interrupted downloads using the REST command. The client passes the number of bytes it has already received as argument to the REST command and restarts the transfer. In some commandline clients for example, there is an often-ignored but valuable command, "reget" (meaning "get again") that will cause an interrupted "get" command to be continued, hopefully to completion, after a communications interruption.

Resuming uploads is not as easy. Although the FTP protocol supports the APPE command to append data to a file on the server, the client does not know the exact position at which a transfer got interrupted. It has to obtain the size of the file some other way, for example over a directory listing or using the SIZE command.

In ASCII mode , resuming transfers can be troublesome if client and server use different end of line characters.

The objectives of FTP, as outlined by its RFC, are:
To promote sharing of files (computer programs and/or data).
To encourage indirect or implicit use of remote computers.
To shield a user from variations in file storage systems among different hosts.
To transfer data reliably, and efficiently.

File Transfer Protocol

In computing, the File Transfer Protocol (FTP) is a network protocol used to transfer data from one computer to another through a network, such as over the Internet.

FTP is a file transfer protocol for exchanging files over any TCP/IP based network to manipulate files on another computer on that network regardless of which operating systems are involved (if the computers permit FTP access). There are many existing FTP client and server programs. FTP servers can be set up anywhere between game servers, voice servers, internet hosts, and other physical servers.